How to Measure
Determining the right size of a watch band is pretty easy. In order to do so, just measure the width and length of your current watch band using a metric ruler or tape measure. If it's a leather band, you may also check the reverse side - the lug width is often imprinted into the lining. For higher accuracy however, we recommend measuring both the lug width (Fig. 1) and the buckle width (Fig. 2) using a digital caliper.
When measuring the length of your current leather watch band (Fig. 3), be sure to measure the hole part and the buckle part without the actual buckle. The hole part, minus the distance between middle hole and band tip, plus the buckle part, plus the watch case diameter, should be equal to your wrist circumference.
In order to determine the appropriate length of a metal bracelet (Fig. 4), first measure your wrist circumference with a metric tape measure, then subtract the watch case diameter from it. Another procedure would be to remove your current metal bracelet from the watch case, and to measure its total length in a flat position.
Length Specifications
Length | Hole Part | Buckle Part | Wrist Circumference |
S | 105 mm | 65 mm | 145-165 mm |
M | 115 mm | 75 mm | 165-185 mm |
L | 125 mm | 85 mm | 185-205 mm |
The above lengths apply to most products from our leather collection. Specifications from other collections may differ. Please always pay attention to the size charts on the respective product pages!