HIRSCH Artisanal - Elements

HIRSCH leather watch straps essentially consist of 3 parts:

• Upper leather – on the upper side of the watch strap
• Lining leather – on the underside of the watch strap
• Inlay layer – an intermediate layer between the upper leather and the lining, which gives the
watch strap its 3-dimensional form

All these parts are made of pure natural materials. The utmost care is necessary in the selection of both the upper and the lining leather; only top quality materials are used. For it is only by providing the highest quality that HIRSCH ensures customer satisfaction.



  1  Security back stitching
  2  HIRSCH No Allergy buckle
  3  Genève foldover
  4  Reinforced tear-proof foldover
  5  Bar seam behind the clasp
  6  Embossed line on the loop
  7  Security stitching on the loop
  8  Saddle stitching, appealing embossing

Leather watch bands are worn directly on the skin for up to 24 hours a day, 7 days a week. They are also, to a greater or lesser extend, subject to wear as a result of the actions we perform with our hands or arms. For reasons of hygiene, therefore, HIRSCH leather watch bands should be cared for and subjected to hygiene checks. Regular care of your leather watch band will considerably extend its life. Leather watch bands from HIRSCH can easily be cleaned with lukewarm water and left to dry.

HIRSCH leather watch bands are designed so that you can wear them with waterproof watches in the shower or while swimming in fresh or salt water. After spending any length of time in a swimming pool or in the sea, the leather watch band (like the watch, and your body) should be rinsed with clear water to remove any salt or chemical residues. A further point is that wet leather watch bands should not be left to dry on a warm surface, since rapid evaporation of water can impair quality. We therefore recommend that the leather watch band is simply allowed to dry on your hand.